Location: Home > News > Company News
How the fractured SMARTROOF PVC HOLLOW ROOF TILE should be repaired.
Time: 2023-06-02

heat reflective roof tiles

SMARTROOF PVC HOLLOW ROOF TILE quality problems, raw material calcium powder added properly, use time is too long, the product will appear brittle crack. Improper transportation or installation causes fracture, logistics is too "violent" in transportation, so that the tile is broken, or improper installation, resulting in fracture.

decorative sheet metal panels

If the SMARTROOF PVC HOLLOW ROOF TILE breaks after being used for a period of time, it is recommended to replace all the tiles of the whole roof, otherwise there is a potential safety hazard. If the fault is caused by improper installation, you can lap the tile plate and then install it or install it at the corners to be cut.

polycarbonate sheet manufacturers

Keel should be straight, should not be twisted and have transverse through section of the knot. SMARTROOF PVC HOLLOW ROOF TILE installation method should be based on the design elevation on the walls around the elastic line leveling. When installing nails around the horizontal line shall prevail. The arch height against the horizontal line shall be 1/200 of the short span of the room, and the longitudinal arch degree shall be lifted evenly. Resin tile try to use GB 3.0mm, purlin spacing 660m.



mail: smartroof@fswinning.cn

News letter sign up

Foshan Smartroof International Co., LTD

Address: Room H, 30/F, Foshan Development Building, No.13, East Hua Yuanrd, Foshan, Guangdong, China

Tel: 0086-757-83128353

E-mail: smartroof@fswinning.cn  felix@fswinning.cn

Website: https://www.smartroofasia.com

Copyright © Foshan Smartroof International Co., LTD All Rights Reserved.    Sitemap   XML