The surface of the whole SMARTROOF METAL ROOF coating will dry in two to six hours, but it will take 24 hours to dry completely, which must be paid more attention to. The skeleton of tile roof is the core of the building, so for its production method has high standards, high requirements, how to make the skeleton of tile roof, I hope the construction personnel can read carefully.
SMARTROOF METAL ROOF: Take the gable side as the starting point, laying from left to right (or the same right to left) in order. Then after the first plate is placed, the alignment line is pulled along the lower edge of the plate, and each piece is installed according to the alignment line, and no deviation is checked at any time. Finally, the laying surface is fixed on the strip along the center of each plate rib with self-tapping screws.
Edge closing: The edge material lap of SMARTROOF METAL ROOF (including rain canopy) shall be fixed with aluminum pull nails and waterproof glue. Then, the self-tapping screw head of the roof edge closing plate and the aluminum nail head shall be prevented by the sealing glue. Finally, when the fixed way of edge closing plate construction needs to be changed according to its on-site measurement, the drawing made after confirmation shall prevail.
Contact:Smartroof
Tel:0086-757-83128353
mail: smartroof@fswinning.cn
Address: Room H, 30/F, Foshan Development Building, No.13, East Hua Yuanrd, Foshan, Guangdong, China
Tel: 0086-757-83128353
E-mail: smartroof@fswinning.cn felix@fswinning.cn
Website: https://www.smartroofasia.com
EN
ES
