SMARTROOF PVC HOLLOW ROOF TILE device should not be directly covered in the use of insulation materials. Construction safety: In order to ensure personal safety, the construction of resin tile should use ladder or other equipment that meets the requirements. It is not allowed to step between two purlins during installation. It is not suitable to carry out shingle installation operation under the temperature below -5℃ and slippery climate such as rain and snow.
SMARTROOF PVC HOLLOW ROOF TILE device at the vertical edge of the shingle, each crest should be fixed on the purlin with fittings, and reinforcement measures should be assisted in windy areas. When installing tile nail, special rubber pad should be used below it. When screwing nut, the tightness should be moderate. It should not be too tight or too fast. When installing the ridge roof, both sides of the resin tile and ridge tile should be installed at the same time.
Lateral pressure of soil and groundwater is often encountered in the design of basement, SMARTROOF PVC HOLLOW ROOF TILE support and retaining wall. In addition to the above loads, there are car and train loads in road and bridge engineering, wave loads and ship loading in port and wharf design, and explosion loads in dangerous goods warehouses.
Contact:Smartroof
Tel:0086-757-83128353
mail: smartroof@fswinning.cn
Address: Room H, 30/F, Foshan Development Building, No.13, East Hua Yuanrd, Foshan, Guangdong, China
Tel: 0086-757-83128353
E-mail: smartroof@fswinning.cn felix@fswinning.cn
Website: https://www.smartroofasia.com
EN
ES
