Location: Home > News > Company News
SMARTROOF PVC HOLLOW ROOF TILE specifications are thick enough not to bubble easily
Time: 2022-09-25

industrial metal roofing

SMARTROOF PVC HOLLOW ROOF TILE perimeter grille or four corners flat. Tile itself moisture content is small, quality clearance, will not produce shrinkage deformation. Installation of purlin or purlin construction personnel pay attention to the spacing is not too large, the keel is not easy to deformation, will not produce irregular deflection. The joint of tile force node should be strict, and there will be no displacement deformation after force. The tile specification is thick enough, especially the cover series tile, although the heat and cold contraction ratio of the two materials is different, it will not cause the tile to bubble easily.

asa roofing sheets

To prevent the deformation of resin TILE should be selected SMARTROOF PVC HOLLOW ROOF TILE quality products, are manufactured with new raw materials, and in strict accordance with the production process. Keel should be straight, should not be distorted and transverse through the section of the joint. The installation should be in accordance with the design elevation on the walls around the spring line leveling, when installing nails around the horizontal line shall prevail, the arch height of the horizontal line is 1/200 of the short span of the room, and the longitudinal arch should be hanging evenly.

synthetic resin tile

SMARTROOF PVC HOLLOW ROOF TILE uses standard 3.0mm, purlin distance of 660m products, so as to better protect the use of products, prevent deformation problems.



mail: smartroof@fswinning.cn

News letter sign up

Foshan Smartroof International Co., LTD

Address: Room H, 30/F, Foshan Development Building, No.13, East Hua Yuanrd, Foshan, Guangdong, China

Tel: 0086-757-83128353

E-mail: smartroof@fswinning.cn  felix@fswinning.cn

Website: https://www.smartroofasia.com

Copyright © Foshan Smartroof International Co., LTD All Rights Reserved.    Sitemap   XML