SMARTROOF PVC HOLLOW ROOF TILE installation will be revealed! Now it is more and more popular among people, because of its unique good performance advantages so popular, so in the installation must pay extra attention to, how to install is also related to its service life! Next, go and have a look with us!
SMARTROOF PVC HOLLOW ROOF TILE purlin can choose square pipe steel (60*40*3mm) or C-type steel (100*50*20*3mm) or wooden square (60*40mm), need to do anti-corrosion treatment. According to the tile type to determine the purlin spacing (bamboo type tile spacing of 660mm- 750mm, large arc tile spacing of 750mm- 880mm), arranged from the bottom up. If it is a two-slope roof, the two slopes shall be installed synchronously and symmetrically, so as to facilitate the anastomosis of the wave forms when the positive ridge tile is installed.
SMARTROOF PVC HOLLOW ROOF TILE main tile installation should be based on the local wind direction installation, the transverse lap between two tiles a crest (including the lap of ridge tile) size is 80mm, the longitudinal lap of a tile pitch, the lap in the purlin contact part must be fixed with self-tapping bolts. The ridge tile is installed after the installation of the end of the ridge tile, and the joint of the positive ridge tile and the ridge tile should be processed flat for the installation of the three-way ridge tile.
Contact:Smartroof
Tel:0086-757-83128353
mail: smartroof@fswinning.cn
Address: Room H, 30/F, Foshan Development Building, No.13, East Hua Yuanrd, Foshan, Guangdong, China
Tel: 0086-757-83128353
E-mail: smartroof@fswinning.cn felix@fswinning.cn
Website: https://www.smartroofasia.com
EN
ES
