SMARTROOF METAL ROOF is suitable for industrial and civil buildings, warehouses, special buildings, the roof of large span steel structure buildings, walls and interior and exterior decoration, etc. It has been widely popularized and applied. What should be paid attention to when installing this tile roof?
After the shingles are delivered to the construction site, they must be stacked and covered with a rain cloth. If the rain is heavy and damp, the boards must be separated immediately, and the wet steam on the surface shall be wiped with a dry cloth, and then the boards shall be stacked to maintain air circulation and make the surface dry.
In order to shorten the construction period, the method of lifting pole and rope is used to lift the SMARTROOF METAL ROOF into bundles at one time to the roof, and then labor division is used. Special attention should be paid to dry and clean gloves when handling shingles, and do not drag steel plates and other things on the surface of shingles.
The staff on the SMARTROOF METAL ROOF should wear soft rubber shoes, and the silt and dirt should be cleaned before the roof. When walking along the roof board lengthwise, they should walk in the trough. When walking along the trough, the load should be balanced and distributed in the foot degree rather than the heel or tip of the foot.
Contact:Smartroof
Tel:0086-757-83128353
mail: smartroof@fswinning.cn
Address: Room H, 30/F, Foshan Development Building, No.13, East Hua Yuanrd, Foshan, Guangdong, China
Tel: 0086-757-83128353
E-mail: smartroof@fswinning.cn felix@fswinning.cn
Website: https://www.smartroofasia.com
EN
ES
