One, If houses and other buildings are built in earthquake zones or areas that are often attacked by strong winds, SMARTROOF PVC HOLLOW ROOF TILE shall be reinforced in these areas that are often subjected to natural disasters and can form a certain degree of vibration.
Two, if the ROOF slope exceeds 50 degrees, in this case the use of SMARTROOF PVC HOLLOW ROOF TILE also needs reinforcement; When the slope of the roof is too small (less than 20 degrees), it is recommended that the longitudinal lap size be not less than 40cm.
Three, in the cornice, gutter, and ridge on both sides of the wave tile should also be appropriate to its reinforcement. Appropriate reinforcement of SMARTROOF PVC HOLLOW ROOF TILE can improve the service life of synthetic resin tile, but also can increase its safety.
Four, when using SMARTROOF PVC HOLLOW ROOF TILE, consider the characteristics of the region, and decide whether to strengthen the resin tile according to the characteristics of the region. For example, in areas with strong winds all year round, the use of resin tile to reinforce, transverse lap two waves, longitudinal lap at least 40cm, nails recommended 6 sets per square.
The above is a brief analysis of SMARTROOF PVC HOLLOW ROOF TILE manufacturer for you in the use of resin tile to build houses need to strengthen some of the situation, if you need resin tile, synthetic resin tile and resin tile accessories, welcome to call for advice!
Contact:Smartroof
Tel:0086-757-83128353
mail: smartroof@fswinning.cn
Address: Room H, 30/F, Foshan Development Building, No.13, East Hua Yuanrd, Foshan, Guangdong, China
Tel: 0086-757-83128353
E-mail: smartroof@fswinning.cn felix@fswinning.cn
Website: https://www.smartroofasia.com